Beside the normal hobby servo, a special servo which can provide feedback could be more attractive. IB53BHU is a light weight standard size servo, providing access to feedback potentiometer through the additional fourth orange wire, which is capable to measure the output angle directly.
40KG high torque and metal gear chain design for heavy duty application. Simply hookup the analog feedback wire to any Analog pin of Microcontroller. With this position feedback function, you can ensure the servo has reached its designated position or detect any potential impediments, of course, this allows additional closed-loop control from your controller. Enable for more complex robotics or industry applications, such as determining when the servo has reached its target, detecting when the output is blocked, or implementing your own higher-level closed-loop position control.
Beside this IB53BHU servo, we also have IA73BHLW, IA81BHLW feedback servo with different feedback for selection. Custom spec is acceptable.
Feature
Medium Aluminum Case
2S LiPo High Voltage Capable
Long Lifespan Brushless Motor
Separate Single Wire with JR Female Connector
Using Typical RC Servo Commands for Operation
Help to Implement Close-loop Position Control
Suitable for Robotics, Industry, Interactive artwork, Small-scale animatronics etc.
Standard 3-pin connector matching most popular modeling controllers and an additional servo position pin.
Specification
Model Name: IB53BHU
Operating Voltage: 4.8-8.4V
Operating speed: 0.150sec/60° @ 6.0V
Operating speed: 0.135sec/60° @ 7.4V
Operating speed: 0.120sec/60° @ 8.4V
Stall Torque: 30 kg-cm (417 oz-in) @ 6.0V
Stall Torque: 36 kg-cm (500 oz-in) @ 7.4V
Stall Torque: 40 kg-cm (556 oz-in) @ 8.4V
Gear: Steel
Motor: Brushless
Size: 40*20*37.5mm (1.57 x 0.78 x 1.47 in)
Weight: 69.5g
Connector Wire: JR Dupont 2.54* 4PIN 300mm / 22AWG
Position Signal Voltage: 300 to 3000 mV @180°