Gyros which helps drivers keep their car in a straight line. Hold that perfect drift angle combined with high speeds with Gyro pre-loaded with a customized firmware for Drifting. Make corrective steering adjustment for RC cars! Upgrade full aluminum case for better heat resistance and impact resistance.
Features adjustments to suit all brands servo on the market, ranging from analog to digital servos and you can also reverse the direction which the gyro acts. The gyro gain (Or sensitivity) can be adjusted on the fly for drifters with transmitters featuring more than 2 channels and also can be adjusted on the gyro itself.
◆ CNC Aluminum Alloy for High Efficiency Cooling and Well-Protection
◆ Reliable and High-Performance Gyroscope Sensor
◆ Simple and Quick Installation with Compact Size
◆ High Voltage 2s Lipo Capable
◆ Ideal for RC Speed Run Car, Competition Grade Drifting, 1/10 RC Drift, F1 Car
Here is the video to show how to set up GY01 gyro: https://www.youtube.com/watch?v=Y0LY42zGVIU
◆Operating Voltage: 3.7-8.4V
◆Current Grain: 20mA/6V
◆Operating Temperature: -10℃+50℃
◆Input Signal：PWM（50-333Hz）/SANWA SHR
◆Control System：PID Control System
Dial Switch Setting
SW1: Servo output signal setting: Digital/ Analog
Note: Digital signal only for digital servo, if use analog servo,it could damage because of heat.
SW2: Normal/ Reverse setting, change the servo direction.
Signal Input Mode
1. PWM（50-333Hz）suitable for most of remote control system, while do not plug in the gain wire, the gyro’s
potentiometer can be used for gain adjustment.
2. SHR suitable for Sanwa remote control system